UMAX Scanner PowerLook Driver MagicScan 4.30 Windows 9x/ME/NT4/2000/XP download

UMAX Scanner PowerLook Driver MagicScan 4.30 Windows 9x/ME/NT4/2000/XP. German and English version of MagicScan 4.30. For a small installation (without calibration profiles) select custom installation und check MagicScan driver only. For Windows XP Users: For any installation please ignore the WindowsXP compatibility warning und continue the setup. Umax drivers are Windows 2000 compatible and can be used without limitation under Windows XP.  After the driver installation do not reboot your computer if you hooked up the scanner using the Umax PCI SCSI controller DMX-3191. Doing so will prevent WinXP to boot correctly. In this case you might need to start WinXP in Safe Mode and install the proper driver manually. After the driver installation and before a reboot a Win2000/XP compatible driver for the DMX-3191 controller has to be installed. For the WinXP installation please use the latest MagicScan/VistaScan Win2000 driver. To install the Umax ISA SCSI Interface UDS-IS11 download the current driver DTC3X8X.sys. Open the dialog "System Properties/Hardware" and launch the Hardware-Assistent. Klick on "Continue/Yes.../Add new hardware/Select from a list". In the hardware list select "SCSI & Raid-Controller" and click on the button "File" to select the expanded file dtc3x8x.inf. Before finishing click on "Extended" and select the address 340h. For the Astra and Vista series scanners please use the custom setup of the VistaScan driver and do not install color profiles. After the installtion of the appropriate VistaScan version install the VistaScan Updater For WinXP. In many cases after the system reboot SCSI scanners will be improperly detected and have eight entries in the device manager. A solution to this problem might be a firmware upgrade (except for the Vista series and Powerlook I and II). Another solution might be a modification of a registry entry WinXP Registry. Should the Scanner not be detected at all and appears in the device manager as an unrecognized device, select the driver manually referring to the MagisScan/VistaScan driver folder "Disk2". WindowsXP compatibility warning should be ignored here as well.